Bike Services & Repairs

  • Includes gear/brake adjust, check bearings, clean/lube chain, wipe down frame - $85
  • Install 1 pair of brake pads and adjust - $20
  • Install standard brake (each) - $40
  • Install hydraulic brake without bleed(each) - $40
  • Install hydraulic brake with bleed(each) - $60
  • Install brake cable, lube and adjust(each) from - $20
  • Install brake levers and adjust (pair) - $40
  • Overhaul mechanical caliper brake(each) - $40
  • Overhaul disc brake lever (each) - $60
  • Overhaul disc brake caliper - $60 each (hydraulic $60 + $40 for bleed so $100)
  • Bleed hydraulic disc brake (each) - $40
  • Clean or sand disc brake rotor (each) - $40
  • Remove crank and tighten or adjust bottom bracket - $40
  • Remove crank and bottom bracket, regrease, reinstall and adjust - $80
  • Install or replace crank - $40
  • Install or replace chain ring - $20
  • Install or replace chain - $20
  • Install or replace freewheel or cassette - $20
  • Install or replace pedals - $20
  • Face bottom bracket using industry standard, brand appropriate facing tool - $50
  • Re-thread bottom bracket using industry standard, brand appropriate tapes
    (including cutting compound)
    - $120
  • Face and re-thread bottom bracket together in the same repair - $140
  • Warranty frame swapover - $250
  • Install gear cable and adjust (each) from - $20
  • Install STI levers and adjust (pair) - $80
  • Install STI internal and adjust (each) - $80
  • Install MTB shifter and adjust (pair) - $60
  • Install derailleur and adjust (each) - $60
  • Adjust front or rear gears (each) - $30
  • Flush out STI lever and adjust gears (each) - $40
  • Install mechanical group set
    (this price is discounted by 20% if parts group set is purchased from Plenty Cycles)
    - $250
  • Install Electronic group set
    (this price is discounted by 20% if parts group set is purchased from Plenty Cycles)
    - $300
  • Adjust steering headset - $30
  • Re-grease and recondition steering headset - $40
  • Install stem - $20
  • Install handlebars MTB from - $30
  • Install handlebars ROAD from - $50
  • Install handlebars ROAD AERO internal cabling - $120
  • Install fork - $40
  • Install fork and headset - $60
  • Install bar ends - $20
  • Fit handlebar tape - $20
  • Fit time-trial bars - clamp-on - $40
  • Fit time-trial bars - integrated - $100
  • Install or replace quill stem - $40
  • Install compression cap and adjust steering headset - $30
  • Cut down MTB handlebars - $30
  • Cut down steerer and adjust steering headset - alloy - $40
  • Cut down steerer and adjust steering headset - carbon - $50
  • Insurance quote
    (refunded to customer if repair completed by Plenty Cycles within one month of quote date)
    - $40
  • Insurance quote + scan and email to customer or insurance company
    (refunded to customer if repair completed by Plenty Cycles within one month of quote date)
    - $60
  • Repair quote
    (refunded to customer if repair completed by Plenty Cycles within one month of quote date)
    - $40
  • Install rear rack - $40
  • Install baby seat - $60
  • Install computer - $30
  • Install cadence computer - $40
  • Install Garmin and calibrate - $30
  • Miscellaneous labour charge rate (per hour) - $80
  • Warranty frame swapover - $250
  • Warranty frame processing fee is $100 This is refunded back to the customer if Plenty Cycles build the new warranty frame at a $250 build charge -
  • Warranty wheel and/or other part processing fee of $50 If original wheels and/or part not purchased from Plenty Cycles -
  • Insurance quotation
    (refunded to customer if repair completed by Plenty Cycles within one month of quote date)
    - $40
  • Insurance quote + scan and email to customer or insurance company
    (refunded to customer if repair completed by Plenty Cycles within one month of quote date)
    - $60
  • Repair quote
    (refunded to customer if repair completed by Plenty Cycles within one month of quote date)
    - $40
  • Install seal kit from - $80
  • Install front suspension forks and adjust brake as required from - $60
  • Install rear suspension - $40
  • Install rear swing arm and refit parts as required from - $80
  • Remove and regrease all rear pivots for rear suspension swing-arm - $80
  • Remove fork to send to manufacturer for service, box and reinstall - $60*
  • Remove rear shock to send to manufacturer for service, box and reinstall - $60*
  • *Charges from other wholesalers (freight, labour, parts etc) will be added to this charge.
  • Install tube and/or tyre - wheel only - $10
  • Install tube and/or tyre - in bike - booked in - $20
  • Install tube and/or tyre internal hub in bike - $40
  • Rear wheel cassette swap - $20
  • Install free hub body - $40
  • Adjust hub cones or bearings (each) - $20
  • Re-grease/recondition hub (each) - $40
  • Glue on tubular tyre (includes glue) (each) - $60
  • Glue on tubular tyre (includes glue) plus install valve extender installation (each) - $80
  • Service internally geared hub from - $80
  • True wheel - minor buckle from - $20
  • True wheel - major buckle from - $30
  • Replace spoke and true wheel only from - $20
  • Replace spoke and true wheel in bike from - $30
  • Build wheel - standard - $80
  • Build wheel - performance/pair-spoke - $100
  • Spoke prep lock-tight (per wheel) - $20